ArYiX World

LugMen en guerra interna?

2009-09-11T22:30:00.001-07:00

Los que hacen vs los que dicen, una dictadura de kastor echando gente sin sentido por ser como son, ahora conocido por kastor y sus amigos, antes lugmen, tengo para decirles que lugmen todavia existe, sin censuras, sin miedos, sin chupapijismo de nadie, sin restricciones.
Me parece que quien puso, consiguio, movio, etc la onda para la ultima a14n se merece otro trato, vamos muchachos!

Archlinux 2009.08 Benchmarks (a pedido del público)

2009-09-04T08:27:00.000-07:00

Ya vimos anteriormente benchmarks entre win(*), opensolaris y Ubuntu, al principio me pareció buena la comparación pero me molestaba la idea de que no aparecieran otras distribuciones mucho mas rápidas que ubuntu, tal como Archlinux, Gentoo, ZenWalk, Exherbo, Funtoo, GoboLinux, VectorLinux y muchas otras.

Facebook mordiendo el polvo.....

2009-08-11T14:21:00.000-07:00

El mensaje que aparece cuando intento entrar al sitio web.
"""
Esta cuenta no está disponible temporalmente.

Tu cuenta no está disponible en este momento debido a un problema en el sitio que esperamos resolver en breve. Por favor, vuelve a intentarlo en unos minutos.
"""
Esto esta cada vez peor, casi nunca puedo subir fotos ni nada, sera por eso que me quede con picasaweb?

Linux 2.6.27

2008-10-11T09:24:00.000-07:00

Ayer vió la luz el kernel 2.6.27 que tiene un montón de cambios, tantos que pueden aburrirse de leer el resumen, de modo que ahora viene con índice.

Esto muestra el cambio estructural que ha tenido nuestro kernel preferido.

Este último sera incluido en la version final de Ubuntu 8.10

Google chrome desde adentro parte 1

2008-09-14T14:22:00.002-07:00

En una serie de posts iré escribiendo lo que se vé en el código fuente de google chrome.

usando subversion :(
hay que bajarse (chuparse) 2,6GB.

desde la raíz:

src$ ls
AUTHORS build gears LICENSE sandbox testing v8
base chrome google_update net sdch third_party webkit
breakpad DEPS googleurl rlz skia tools

third_party/
bsdiff cygwin libjpeg libxslt modp_b64 pthread scons tlslite
bspatch DEPS libpng lighttpd mozilla python_24 sqlite WebKit
bzip2 icu38 libxml lzma_sdk npapi README.google svn zlib

Adiós gmail

2008-09-11T16:05:00.000-07:00

En los últimos días he tenido mucho problemas a causa de gmail, despues de 4 años de ser beta están peor que windows, no sólo eso, sino que ahora con google chrome quieren monopolizar la web. Al empezar a usar gmail la gente me criticó por no ser libre, yo queria probarlo y ya lo probé. Espero que ahora estén contentos, porque de a poco iré abandonando todos sus servicios(gmail, google, blogspot).

Wikia Search, Una nueva forma libre de buscar

2008-08-26T17:24:00.000-07:00

Wikia Search es un motor búsquedas libre basado en la retroalimentación de los usuarios, se basa en cuatro principios:

1. Transparencia: que el público sepa cómo operan los sistemas y algoritmos de búsqueda, ya sea con licencias de código abierto, como con contenidos abiertos + APIs.

2. Comunidad: cualquier persona puede colaborar de alguna forma (de forma individual o mediante una organización), con un fuerte acento social y comunitario.

3. Calidad: queremos mejorar significativamente la relevancia y exactitud de los resultados y la experiencia de búsqueda.

4. Privacidad: habrá una protección de los datos de identificación de los usuarios y de sus preferencias de búsqueda.

leer más

Quake 3 no morirá jamás. (ahora es OpenArena)

2008-08-05T08:40:00.000-07:00

Según el Roadmap de OpenArena en los próximos días veremos la versión 0.8 con nuevos efectos, nuevas voces, nuevos personajes. Para los fans de los MODS también se están portando los mods de q3a.

Foxconn a la lista negra!

2008-07-26T19:04:00.000-07:00

Leo recientemente que Foxconn atenta contra Linux saboteando sus acpi para que reporten datos erroneos en Linux impidiendo asi que se pueda suspender, reinicar, apagar por acpi.

La foto es de una Foxconn G33.

NO COMPREN!!!

2008-02-10T12:44:00.000-08:00

Notebook Olivetti 810 (specs con linux)

aca les dejo las specs de la notebook olivetti 810, funcionando todo el hardware perfectamente y todos los controles.


Linux version 2.6.24-gentoo (root@sabretooth) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Tue Jan 29 01:12:22 Local time zone must be set--see zic
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
BIOS-e820: 000000003f690000 - 000000003f69d000 (ACPI data)
BIOS-e820: 000000003f69d000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
ACPI: Shall use APIC/MADT table 2
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000f7860
Entering add_active_range(0, 0, 229376) 0 entries of 256 used
Zone PFN ranges:
DMA             0 ->     4096
Normal       4096 ->   229376
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
  0:        0 ->   229376
On node 0 totalpages: 229376
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F77B0, 0014 (r0 PTLTD )
ACPI: RSDT 3F696CAF, 0048 (r1 STD    STANDARD  6040000  LTP        0)
ACPI: FACP 3F69CE20, 0074 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
ACPI: DSDT 3F69838C, 4A94 (r1 UW____ FUW_____  6040000 INTL 20050624)
ACPI: FACS 3F69DFC0, 0040
ACPI: APIC 3F69CE94, 0068 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
ACPI: HPET 3F69CEFC, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
ACPI: MCFG 3F69CF34, 003C (r1 INTEL  CALISTGA  6040000 LOHR       5A)
ACPI: APIC 3F69CF70, 0068 (r1 PTLTD    APIC    6040000  LTP        0)
ACPI: BOOT 3F69CFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SSDT 3F697D3D, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
ACPI: SSDT 3F6976AB, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
ACPI: SSDT 3F696CF7, 04F6 (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 2
ACPI: If "acpi_apic_instance=0" works better, notify linux-acpi@vger.kernel.org
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227584
Kernel command line: root=/dev/sda1 ro acpi_apic_instance=2 acpi_osi=Linux vga=791
ACPI: Added _OSI(Linux)
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1600.117 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 905308k/917504k available (2363k kernel code, 11800k reserved, 837k data, 216k init, 0k highmem)
virtual kernel memory layout:
  fixmap  : 0xfffb4000 - 0xfffff000   ( 300 kB)
  vmalloc : 0xf8800000 - 0xfffb2000   ( 119 MB)
  lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
    .init : 0xc0428000 - 0xc045e000   ( 216 kB)
    .data : 0xc034efca - 0xc042047c   ( 837 kB)
    .text : 0xc0100000 - 0xc034efca   (2363 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 3203.03 BogoMIPS (lpj=16015183)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel Genuine Intel(R) CPU           T2050  @ 1.60GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3200.20 BogoMIPS (lpj=16001040)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU           T2050  @ 1.60GHz stepping 08
Total of 2 processors activated (6403.24 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query honored via cmdline
ACPI: DMI System Vendor: Standard
ACPI: DMI Product Name: L41II1 and L41II2
ACPI: DMI Product Version:                               
ACPI: DMI Board Name: L41II1 and L41II2
ACPI: DMI BIOS Vendor: Standard
ACPI: DMI BIOS Date: 03/14/2007
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:05:00.0
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Time: tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:06: ioport range 0x200-0x20f has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:07: ioport range 0x6a0-0x6af has been reserved
system 00:07: ioport range 0x6b0-0x6ff has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: f000-ffff
MEM window: fac00000-febfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: f7000000-f70fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: f0200000-f02fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
JFS: nTxBlock = 7072, nTxLock = 56582
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 3F697438, 01EA (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT 3F6971ED, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F697622, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT 3F6973B3, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (33 C)
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 7932kB
intelfb: MTRR is disabled in the kernel
intelfb: Non-CRT device is enabled ( LVDS port ).  Disabling mode switching.
intelfb: Initial video mode is 1024x768-16@60.
intelfb: Changing the video mode is not supported.
Console: switching to colour frame buffer device 128x48
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.20, max UDMA/33
ata1.00: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.20 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19
ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19
ata3.00: ATA-7: HTS541080G9SA00, MB4OC60R, max UDMA/100
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4O PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
input: PS/2 Logitech Wheel Mouse as /class/input/input5
lguest: mapped switcher at ffc00000
cpuidle: using governor ladder
cpuidle: using governor menu
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Marking TSC unstable due to: TSC halts in idle.
Starting balanced_irq
Time: hpet clocksource has been installed.
Using IPI No-Shortcut mode
VFS: Mounted root (jfs filesystem) readonly.
Freeing unused kernel memory: 216k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
iwl3945: Copyright(c) 2003-2007 Intel Corporation
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
intel_rng: FWH not detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
8139too Fast Ethernet driver 0.9.28
Clocksource tsc unstable (delta = -163241435 ns)
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
PCI: Enabling device 0000:05:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
iwl3945: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf0004000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
PCI: Enabling device 0000:06:04.0 (0195 -> 0197)
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 18 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:06:04.0, OHCI version 1.10
sdhci: SDHCI controller found at 0000:06:04.2 [1217:7120] (rev 1)
ACPI: PCI Interrupt 0000:06:04.2[A] -> GSI 18 (level, low) -> IRQ 18
sdhci:slot0: Unknown controller version (16). You may experience problems.
mmc0: SDHCI at 0xb0300800 irq 18 PIO
ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 16 (level, low) -> IRQ 17
eth0: RealTek RTL8139 at 0xf8c7ec00, 00:03:0d:60:12:44, IRQ 17
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
firewire_core: created new fw device fw0 (0 config rom retries, S400)
Adding 996020k swap on /dev/sda2.  Priority:-1 extents:1 across:996020k
eth0: link down




lspci -v

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
Subsystem: Uniwill Computer Corp Unknown device 9903
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Uniwill Computer Corp Unknown device 9903
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 1800 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at b0040000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [d0] Power Management version 2
Kernel driver in use: intelfb

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Uniwill Computer Corp Unknown device 9903
Flags: bus master, fast devsel, latency 0
Memory at b0100000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Subsystem: Uniwill Computer Corp Unknown device 9080
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at f0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: fac00000-febfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Uniwill Computer Corp Unknown device 907b
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport-driver

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Uniwill Computer Corp Unknown device 907b
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport-driver

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f7000000-f70fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Uniwill Computer Corp Unknown device 907b
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport-driver

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: bus master, medium devsel, latency 0, IRQ 21
Memory at f0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f02fffff
Capabilities: [50] Subsystem: Uniwill Computer Corp Unknown device 907b

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
Kernel modules: intel-rng

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix

00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 18d0 [size=8]
I/O ports at 18c4 [size=4]
I/O ports at 18c8 [size=8]
I/O ports at 18c0 [size=4]
I/O ports at 18b0 [size=16]
Memory at f0004400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: medium devsel, IRQ 10
I/O ports at 18e0 [size=32]

05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Subsystem: Intel Corporation Unknown device 1000
Flags: bus master, fast devsel, latency 0, IRQ 220
Memory at f7000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [e0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 40-e0-38-ff-ff-77-1b-00
Kernel driver in use: iwl3945
Kernel modules: iwl3945

06:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) (prog-if 10 [OHCI])
Subsystem: Uniwill Computer Corp Unknown device 300b
Flags: bus master, stepping, medium devsel, latency 32, IRQ 18
Memory at f0200000 (32-bit, non-prefetchable) [size=4K]
Memory at b0300000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [60] Power Management version 2
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: slow devsel, IRQ 18
Memory at b0300800 (32-bit, non-prefetchable) [size=256]
Capabilities: [a0] Power Management version 2
Kernel driver in use: sdhci
Kernel modules: sdhci

06:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
Subsystem: Uniwill Computer Corp Unknown device 907b
Flags: slow devsel, IRQ 3
Memory at f0202000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [a0] Power Management version 2

06:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Uniwill Computer Corp Unknown device 9700
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at 2000 [size=256]
Memory at b0300c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Kernel modules: 8139too


/proc/cpuinfo


processor : 0
vendor_id : GenuineIntel
cpu family : 6
model  : 14
model name : Genuine Intel(R) CPU           T2050  @ 1.60GHz
stepping : 8
cpu MHz  : 1600.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id  : 0
cpu cores : 2
fdiv_bug : no
hlt_bug  : no
f00f_bug : no
coma_bug : no
fpu  : yes
fpu_exception : yes
cpuid level : 10
wp  : yes
flags  : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor est tm2 xtpr
bogomips : 3203.03
clflush size : 64

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model  : 14
model name : Genuine Intel(R) CPU           T2050  @ 1.60GHz
stepping : 8
cpu MHz  : 1600.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id  : 1
cpu cores : 2
fdiv_bug : no
hlt_bug  : no
f00f_bug : no
coma_bug : no
fpu  : yes
fpu_exception : yes
cpuid level : 10
wp  : yes
flags  : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor est tm2 xtpr
bogomips : 3200.20
clflush size : 64



x86info v1.21.  Dave Jones 2001-2007
Feedback to .

Found 2 CPUs
--------------------------------------------------------------------------
CPU #1
Family: 6 Model: 14 Stepping: 8 Type: 0 Brand: 0
CPU Model: Core  Original OEM
Feature flags:
fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflsh ds acpi mmx fxsr sse sse2 ss ht tm pbe
Extended feature flags:
sse3 monitor est tm2 xTPR [15]
xd
Cache info
L1 Instruction cache: 32KB, 8-way associative. 64 byte line size.
L1 Data cache: 32KB, 8-way associative. 64 byte line size.
L2 unified cache: 2MB, sectored, 8-way associative. 64 byte line size.
TLB info
Instruction TLB: 4K pages, 4-way associative, 128 entries.
Instruction TLB: 4MB pages, fully associative, 2 entries
Data TLB: 4K pages, 4-way associative, 128 entries.
Data TLB: 4MB pages, 4-way associative, 8 entries
64 byte prefetching.
The physical package supports 2 logical processors

--------------------------------------------------------------------------
CPU #2
Family: 6 Model: 14 Stepping: 8 Type: 0 Brand: 0
CPU Model: Core  Original OEM
Feature flags:
fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflsh ds acpi mmx fxsr sse sse2 ss ht tm pbe
Extended feature flags:
sse3 monitor est tm2 xTPR [15]
xd
Cache info
L1 Instruction cache: 32KB, 8-way associative. 64 byte line size.
L1 Data cache: 32KB, 8-way associative. 64 byte line size.
L2 unified cache: 2MB, sectored, 8-way associative. 64 byte line size.
TLB info
Instruction TLB: 4K pages, 4-way associative, 128 entries.
Instruction TLB: 4MB pages, fully associative, 2 entries
Data TLB: 4K pages, 4-way associative, 128 entries.
Data TLB: 4MB pages, 4-way associative, 8 entries
64 byte prefetching.
The physical package supports 2 logical processors

--------------------------------------------------------------------------
sensors

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +37 C  (high =   +85 C)                 

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +43 C  (high =   +85 C)                 

/proc/interrupts

         CPU0       CPU1     
0:     563052          0   IO-APIC-edge      timer
1:       9850          0   IO-APIC-edge      i8042
8:         24          0   IO-APIC-edge      rtc
9:       5299          0   IO-APIC-fasteoi   acpi
12:        140          0   IO-APIC-edge      i8042
14:      52503          0   IO-APIC-edge      libata
15:          0          0   IO-APIC-edge      libata
17:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4, eth0
18:         76          0   IO-APIC-fasteoi   uhci_hcd:usb3, firewire_ohci, sdhci:slot0
19:       7462          0   IO-APIC-fasteoi   libata, uhci_hcd:usb2
20:     199260          0   IO-APIC-fasteoi   HDA Intel
21:          0          0   IO-APIC-fasteoi   uhci_hcd:usb1, ehci_hcd:usb5
220:         12          0   PCI-MSI-edge      iwl3945
NMI:          0          0   Non-maskable interrupts
LOC:      10995     393603   Local timer interrupts
RES:      15530       9588   Rescheduling interrupts
CAL:        519        188   function call interrupts
TLB:        300        399   TLB shootdowns
TRM:          0          0   Thermal event interrupts
SPU:          0          0   Spurious interrupts
ERR:          0
MIS:          0

/proc/dma

4: cascade

/proc/ioports

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
0170-0177 : libata
01f0-01f7 : 0000:00:1f.1
01f0-01f7 : libata
0200-020f : pnp 00:06
0376-0376 : 0000:00:1f.1
0376-0376 : libata
03f6-03f6 : 0000:00:1f.1
03f6-03f6 : libata
0680-069f : pnp 00:06
06a0-06af : pnp 00:07
06b0-06ff : pnp 00:07
0800-080f : pnp 00:06
0cf8-0cff : PCI conf1
1000-107f : 0000:00:1f.0
1000-107f : pnp 00:06
  1000-1003 : ACPI PM1a_EVT_BLK
  1004-1005 : ACPI PM1a_CNT_BLK
  1008-100b : ACPI PM_TMR
  1010-1015 : ACPI CPU throttle
  1020-1020 : ACPI PM2_CNT_BLK
  1028-102f : ACPI GPE0_BLK
1180-11bf : 0000:00:1f.0
1180-11bf : pnp 00:06
1640-164f : pnp 00:06
1800-1807 : 0000:00:02.0
1810-181f : 0000:00:1f.1
1810-181f : libata
1820-183f : 0000:00:1d.0
1820-183f : uhci_hcd
1840-185f : 0000:00:1d.1
1840-185f : uhci_hcd
1860-187f : 0000:00:1d.2
1860-187f : uhci_hcd
1880-189f : 0000:00:1d.3
1880-189f : uhci_hcd
18b0-18bf : 0000:00:1f.2
18b0-18bf : libata
18c0-18c3 : 0000:00:1f.2
18c0-18c3 : libata
18c4-18c7 : 0000:00:1f.2
18c4-18c7 : libata
18c8-18cf : 0000:00:1f.2
18c8-18cf : libata
18d0-18d7 : 0000:00:1f.2
18d0-18d7 : libata
18e0-18ff : 0000:00:1f.3
2000-2fff : PCI Bus #06
2000-20ff : 0000:06:05.0
  2000-20ff : 8139too
f000-ffff : PCI Bus #02

/proc/iomem

00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000dc000-000dffff : reserved
000f0000-000fffff : System ROM
00100000-3f68ffff : System RAM
00100000-0034efc9 : Kernel code
0034efca-0042047b : Kernel data
0045e000-0049fc83 : Kernel bss
3f690000-3f69cfff : ACPI Tables
3f69d000-3f6fffff : ACPI Non-volatile Storage
3f700000-3fffffff : reserved
b0040000-b007ffff : 0000:00:02.0
b0080000-b00fffff : 0000:00:02.0
b0080000-b00fffff : intelfb
b0100000-b017ffff : 0000:00:02.1
b0300000-b03007ff : 0000:06:04.0
b0300800-b03008ff : 0000:06:04.2
b0300800-b03008ff : sdhci:slot0
b0300c00-b0300cff : 0000:06:05.0
b0300c00-b0300cff : 8139too
c0000000-cfffffff : 0000:00:02.0
c0000000-cfffffff : intelfb
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : reserved
f0000000-f0003fff : 0000:00:1b.0
f0000000-f0003fff : ICH HD audio
f0004000-f00043ff : 0000:00:1d.7
f0004000-f00043ff : ehci_hcd
f0004400-f00047ff : 0000:00:1f.2
f0200000-f02fffff : PCI Bus #06
f0200000-f0200fff : 0000:06:04.0
  f0200000-f0200fff : firewire_ohci
f0202000-f0202fff : 0000:06:04.3
f7000000-f70fffff : PCI Bus #05
f7000000-f7000fff : 0000:05:00.0
  f7000000-f7000fff : iwl3945
fac00000-febfffff : PCI Bus #02
fec00000-fec0ffff : reserved
fed00000-fed003ff : HPET 0
fed00000-fed003ff : reserved
fed14000-fed19fff : reserved
fed1c000-fed8ffff : reserved
fee00000-fee00fff : reserved
ff000000-ffffffff : reserved

# dmidecode 2.9
SMBIOS 2.4 present.
35 structures occupying 1233 bytes.
Table at 0x000DC010.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Standard
Version: 1.10
Release Date: 03/14/2007
ROM Size: 64 kB
Characteristics:
 ISA is supported
 PCI is supported
 PC Card (PCMCIA) is supported
 PNP is supported
 APM is supported
 BIOS is upgradeable
 BIOS shadowing is allowed
 ESCD support is available
 Boot from CD is supported
 ACPI is supported
 USB legacy is supported
 AGP is supported
 BIOS boot specification is supported
 Targeted content distribution is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Standard
Product Name: L41II1 and L41II2
Version:                               
Serial Number: 0000000000
UUID: 008C6175-AF64-0010-AC4E-CF439E759D54
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Standard
Product Name: L41II1 and L41II2
Version:                               
Serial Number:                               

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Standard
Type: Notebook
Lock: Not Present
Version:                               
Serial Number: 00030D004105E64C
Asset Tag:                               
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: E8 06 00 00 FF FB E9 BF
Version: Genuine Intel(R) CPU           T2
Voltage: 3.3 V
External Clock: Unknown
Max Speed: 2048 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 KB
Maximum Size: 16 KB
Supported SRAM Types:
 Burst
 Pipeline Burst
 Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 2048 KB
Maximum Size: 512 KB
Supported SRAM Types:
 Burst
 Pipeline Burst
 Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown

Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J19
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: COM 1
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Mouse Port

Handle 0x000A, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot J8B1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
 5.0 V is provided
 3.3 V is provided

Handle 0x000B, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot J9B1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
 5.0 V is provided
 3.3 V is provided

Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PEG Slot J6C1
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 6
Characteristics:
 5.0 V is provided
 3.3 V is provided

Handle 0x000D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J7C1
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 7
Characteristics:
 5.0 V is provided
 3.3 V is provided

Handle 0x000E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J8C1
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 7
Characteristics:
 5.0 V is provided
 3.3 V is provided

Handle 0x000F, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: HD-Audio

Handle 0x0010, DMI type 11, 5 bytes
OEM Strings
String 1: This is the Intel Calistoga
String 2: Chipset CRB Platform

Handle 0x0011, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.

Handle 0x0012, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000000
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event

Handle 0x0013, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: Not Provided
Number Of Devices: 2

Handle 0x0014, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0013
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: SODIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x0015, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0013
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 1024 MB
Form Factor: SODIMM
Set: 1
Locator: M2
Bank Locator: Bank 1
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x0016, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0013
Partition Width: 0

Handle 0x0017, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0014
Memory Array Mapped Address Handle: 0x0016
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown

Handle 0x0018, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0015
Memory Array Mapped Address Handle: 0x0016
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown

Handle 0x0019, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown

Handle 0x001A, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown

Handle 0x001B, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59

Handle 0x001C, DMI type 26, 20 bytes
Voltage Probe
Description: Voltage Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000

Handle 0x001D, DMI type 27, 12 bytes
Cooling Device
Temperature Probe Handle: 0x001E
Type: Fan
Status: OK
OEM-specific Information: 0x00000000

Handle 0x001E, DMI type 28, 20 bytes
Temperature Probe
Description: Temperature Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000

Handle 0x001F, DMI type 29, 20 bytes
Electrical Current Probe
Description: Electrical Current Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000

Handle 0x0020, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Enabled
Outbound Connection: Disabled

Handle 0x0021, DMI type 32, 20 bytes
System Boot Information
Status: 

Handle 0x0022, DMI type 127, 4 bytes
End Of Table

hdparm -I /dev/sda

/dev/sda:

ATA device, with non-removable media
Model Number:       HTS541080G9SA00                       
Serial Number:      MP2YXBXBHAU9ES
Firmware Revision:  MB4OC60R
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 1
Supported: 7 6 5 4
Configuration:
Logical  max current
cylinders 16383 16383
heads  16 16
sectors/track 63 63
--
CHS current addressable sectors:   16514064
LBA    user addressable sectors:  156301488
LBA48  user addressable sectors:  156301488
device size with M = 1024*1024:       76319 MBytes
device size with M = 1000*1000:       80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
     Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
     Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
Enabled Supported:
   * SMART feature set
     Security Mode feature set
   * Power Management feature set
   * Write cache
   * Look-ahead
   * Host Protected Area feature set
   * WRITE_BUFFER command
   * READ_BUFFER command
   * NOP cmd
   * DOWNLOAD_MICROCODE
   * Advanced Power Management feature set
     Power-Up In Standby feature set
   * SET_FEATURES required to spinup after power up
   * SET_MAX security extension
     Automatic Acoustic Management feature set
   * 48-bit Address feature set
   * Device Configuration Overlay feature set
   * Mandatory FLUSH_CACHE
   * FLUSH_CACHE_EXT
   * SMART error logging
   * SMART self-test
   * General Purpose Logging feature set
   * WRITE_{DMA|MULTIPLE}_FUA_EXT
   * SATA-I signaling speed (1.5Gb/s)
   * Native Command Queueing (NCQ)
   * Host-initiated interface power management
     Non-Zero buffer offsets in DMA Setup FIS
     DMA Setup Auto-Activate optimization
     Device-initiated interface power management
     In-order data delivery
   * Software settings preservation
Security:
Master password revision code = 65534
 supported
not enabled
not locked
 frozen
not expired: security count
not supported: enhanced erase
58min for SECURITY ERASE UNIT.
Checksum: correct

2007-11-22T06:58:00.000-08:00

Ley de bosques aprobada por completo

Les quiero comunicar la excelente noticia de que cumplimos el objetivo, SE APROBÓ LA LEY DE BOSQUES Y LA MORATORIA A LOS DESMONTES ES COMPLETA. Gracias a la fuerte presión de Greenpeace, de todas las organizaciones aliadas entre las que están ECO-ACCION Mendoza y de todos los argentinos que firmaron para apoyar se consiguió la sanción de esta ley pese a la fuerte presión de intereses económicos.
Quiero darles un especial agradecimiento a todos los miembros de Eco-Acción que se sumaron a juntar firmas para esta campaña durante 5 eco-acciones, con los cuales reunimos las casi 1300 firmas de mendocinos que de puño y letra nos apoyaron.
Aprovecho además para invitarlos a seguir luchando para conseguir nuevas metas por la defensa de nuestro medio ambiente.

2007-11-08T14:04:00.000-08:00

El fin de locate, slocate y mlocate?

Creo que muchos conocen la historia de buscar archivos, muchos usan find, otros locate, despues locate evoluciono en slocate, mas tarde aparece mlocate, y ahora finalmente me encuentro con rlocate (modulo de kernel + demonio).

es Archlinux con el repo community:

pacman -S rlocate

en /etc/rc.conf agregar:

MODULES=(rlocate)

DAEMONS=(rlocate)

como root:

#groupadd rlocate
#updatedb

para buscar como siempre:

$locate archivo_perdido

y a volar cuando busquen...

2007-03-21T08:03:00.000-07:00

CenterIM un fork de CenterICQ

Leo que recientemente se ha creado CenterIM, "el fork" de centericq, despues de ser marcado como obsoleto centericq porque tener muchos bugs, ahora presenciamos el nacimiento de un nuevo proyecto y la evolucion natural del software libre.

2007-02-28T00:13:00.000-08:00

Centericq vive o muere?

Leo recientemente que el proyecto centericq esta desmantenido, pero el peso de los usuarios se hace sentir, ellos lo mantienen, lo arreglan y hasta el dia de hoy sobrevive, seguido muy de atras por gaim-text y naim, centericq sigue siendo el rey de la mensajeria instantanea en modo texto.

salu

2006-07-13T15:34:00.000-07:00

Para usuarios de software libre, ex usuarios de software no libre.

Bienvenidos!

A continuacion una mini guia de como ser usuario de software libre,
porque tambien debemos aprender a ser usuarios, ya que no basta con
solo usar el software.

Para los recien llegados...Nuestro recurso mas preciado.

Los usuarios, los grupos de usuarios (Lug's), las listas de correo de
software libre, estan ahi para ayudar, para facilitar la comunicacion
y la interactividad de la comunidad. "NO" estan para resolver los
problemas de los particulares, ni hacer el trabajo de otro por lo
que suelen contestar a una forma muy molesta cuando se hace referencia
a estos.

Los usuarios de software libre debemos (moralmente hablando)
contribuir, con los desarrolladores, usuarios, mantenedores y
empaquetadores del software.

Las formas de colaborar pueden ser las siguientes:

1. Informando a las listas de correo, autor, mantenedor o grupos de
usuarios, de la distribucion del software, sobre el funcionamiento
correcto o incorrecto del mismo.

2. Aportando ideas, arreglos, mejoras, traducciones, documentacion,
etc.

3. Popularizar el software, notificando a los otros usuarios, o grupos
de usuarios de algun programa que resuelve un problema, o realiza
una tarea comun que pueda ser util para otros.

4. Compartir ideas, inquietudes y dudas respecto a cierto software.

5. Compartir el software, hacer copias, y distribuirlo.

Entonces, como ayuda esto a la comunidad de software libre?

1. Ayuda a mantener el software funcional y libre de errores para
todos los usuarios, todos los problemas y errores de cierto software
deberian ser publicados en mas de un lugar publico de modo que se
asegure el conocimiento de estos.

2. Ayuda a mejorar el software, soporte de idiomas, facilitando el
aprendizaje del mismo y la integracion en la comunidad.

3. Sirve para mantener la comunidad informada de los nuevos programas
que son usados por otros usuarios para resolver sus tareas o en el uso
cotidiano.

4. Retroalimentacion para los desarrolladores y usuarios, sobre algun
soporte que se esperaba de dicho software, nuevas ideas para mejorar
el proyecto, ayuda a mantener activo el proyecto y motivados a los
desarrolladores, ya que estos necesitan saber que hay usuarios del
mismo, sin usuarios ni actividad, los desarrolladores pueden suponer
que nadie utiliza dicho software y abandonarlo.

5. La distribucion del software libre es muy importante para los
usuarios, las comunidades, y los desarrolladores, porque sume gente a
las comunidades, populariza el software, promueve la idea de
compartir el software libre entre los usuarios y la ayuda mutua.

"Los usuarios de software no libre estan acostumbrados a adaptarse al
software provisto por el vendedor."

Lo anteriormente dicho es totalmente falso, y no debe ser asi, por lo
que en el software libre es al reves, ya que pensamos que el software
se hace para el usuario, y no el usuario para el software.

"Las herramientas se hacen para los hombres, no los hombres para las
herramientas".

El software libre es modificable y adaptable al gusto y a la comodidad
del usuario para facilitar la interaccion entre estos de manera que el
usuario sea mas productivo a la vez de sentirse mas comodo.

Asegurando la continuidad del software...

Mientras existan grupos o usuarios activos de cierto software, se
asegura la continuidad de este.

Esta es mi opinion, no una ley.

Sentite libre de enviarme sugerencias, comentarios, criticas,
arreglos, agregados para mejorar esta guia.

ArYiX arroba
LugMen.org.ar(Grupo de usuarios de software libre en Mendoza)

Esto fue escrito usando Debian GNU/Linux, Gnome, y algun editor de
textos.

2005-11-11T06:43:00.000-08:00

Permanentes ataques via ssh

Revisando los logs de varios servidores, pude apreciar que hace tiempo estan recibiendo ataques al puerto 22 (sshd), lo cual me parecio normal, dado que siempre los he tenido, pero ahora se torna mas molesto, puesto que los ataques son desde varias IP y constantes.

en el archivos /var/log/messages se puede ver:

Sep 30 05:12:00 server sshd[8147]: Invalid user webadmin from 220.125.251.21
Sep 30 05:12:05 server sshd[8152]: User ftp not allowed because not listed in AllowUsers
Sep 30 05:12:11 server sshd[8157]: Invalid user test from 220.125.251.21
Sep 30 05:12:17 server sshd[8162]: User root not allowed because not listed in AllowUsers

para solucionar esto, decidi elegir "denyhosts" que agrega la lista de IP's tratando de conectarse al puerto 22 con usuarios invalidos o con varios intentos fallidos de intrusion usando claves al azar.

un problema fue, que el server a instalarle denyhosts, era accedido via ssh, por lo cual no podia darme el privilegio de fallar.

despues de lanzar el demonio denyhosts, pude ver que agrego mi direccion de IP al archivos /etc/hosts.deny, lo cual no me gusto para nada, y me puse a ver como evitar esto, finalemente lo he conseguido.

Habia que crear un archivo /var/lib/denyhosts/allowed-host con una direccion de IP por linea.

DenyHosts esta escrito en Python

Powered by Gentoo

2005-11-11T06:05:00.000-08:00

Compilando Quake 3 Arena

Despues de tanto esperar, la compañia idsoftware, creadora de los juegos mas famosos de disparos en primera persona (FPS), ha liberado Quake 3 Arena bajo licencia GPL, y pocos dias mas tarde ya disponemos de un ebuild para Gentoo de la mano de icculus.

Ahora me puedo bajar el Quake 3 Arena Gratis?

No, porque no es libre el juego completo, solo se ha liberado el lanzador del juego

Despues de esto, que puedo esperar yo, en que me beneficiaria?

Pues en que es GPL y puede ser mejorado, modificado, optimizado, portado, etc etc, como muchas mas ventajas que tiene un software de ser libre.

2005-09-01T04:49:00.000-07:00

Open Source Definition is wrong

La definición de Open Source o fuente abierta está mal

Citando la definición de Open Source o Fuente Abierta, de Bruce Perens, me surgen varias inquietudes, sobre todo en el punto 9, donde dice "La licencia no debe poner restricciones en el otro software que se distribuye junto con el software licenciado. Por ejemplo, la licencia no debe insistir que el resto de los programas distribuidos en el mismo medio deben ser software de fuente abierta."

Lo cuál me parece mal, por qué si algunas personas liberan su código fuente, por que las otras no?, pero la peor parte es, qué hace una definición como esta protegiendo a programas no-libres? diciendo, para que sea libre "NO debe insistir que el resto de los programas sean libres" como se nota que Bruce Perens no es un desarrollador, ni tiene idea sobre que el daño que recibimos los usuarios, se haría un software teniendo en su licencia algo como "este programa es software libre y sólo se permite su redistribución, con otro software libre o de licencia compatible", citando licencias libres como GPL, BSD, etc.

Sólo espero que si se hace no forme parte de la definición de "software infeccioso" de este personaje tan equivocado.

Porque a mi entender el error aquí es que el enfoca como software-libre contamina al software no-libre, lo cuál me parece totalmente a la inversa, porque es el software no-libre el que infecta al software libre, tenemos un ejemplo claro en el caso del kernel linux, es cuál es increiblemente estable, pero se convierte en algo sumamente inestable gracias al aporte de nvidia y su manejador propietario o no-libre.

Entonces? Quién infecta a quién?
Es acaso el manejador de nvidia más importante como desarrollo que el kernel linux?
No lo creo

Si Bruce Perens no es un desarrollador, qué hace opinando sobre esto?
Lo único que esta claro, es que los daños siempre lo sufren los usuarios finales

Este es mi pensar sobre un posible equívoco de Bruce

Bruce Perens you are not a developer and you do not have my respect

2005-08-31T02:40:00.000-07:00

Aqui no hay empresas, propagandas, comprados, politicos, preferencias, racismos, discriminaciones, ni nada de eso.

Lo unico que se dice aqui es lo que se siente-piensa o "sentipensares" como dice Eduardo Galeano.

Todos vinimos al mundo en bolas o sea en igualdad de situacion, lo demas es lo que hacemos, cada uno es lo que hace.

Todos vivimos en el mismo mundo, por mas que volemos y escapemos mentalmente, asi que mientras menos insoportable nos lo hagamos el uno al otro, sera mejor para todos.

Esta es mi vida y estoy aqui para vivirla, no para escribirla, asi que no esperes que me voy a pasar mi unica vida escribiendo aqui, o quien sabe?

Bienvenidos al mundo segun yo